Kinetic Analysis of the Photocatalytic Degradation of Indigo Carmine Using a Heterogeneous MgAl–LDH Catalyst

The removal of recalcitrant industrial dyes from wastewater has emerged as a critical environmental challenge, particularly in the context of the accelerating decline of global freshwater reserves. Given that these contaminants originate predominantly from the effluents of textile, chemical, and related manufacturing sectors, the deployment of advanced treatment technologies prior to discharge is imperative to mitigate their ecological impact. This study investigates the photocatalytic degradation of indigo carmine using a synthesized MgAl–LDH material. LDH is shown to act as an active photocatalytic component rather than a support, with its remarkably simple synthesis offering a practical alternative to the complex catalysts dominating the current literature. The catalyst’s structural, morphological, and surface characteristics were comprehensively validated through XRD, SEM, EDX, and BET analyses. The catalyst was evaluated under varying hydrogen peroxide doses and across an initial dye concentration range of 5 × 10−5 to 5 × 10−4 M. Increasing the H2O2 volume (3.5–20 mL, corresponding to H2O2 excess ratios of 17.5–100) significantly enhanced the oxidation rate, whereas higher dye concentrations reduced efficiency due to photon competition and partial saturation of catalytic sites. These experiments provided the basis for extracting kinetic parameters and assessing the mechanistic pathways governing the photocatalytic process. The kinetic behavior of indigo carmine degradation was evaluated by fitting the experimental data to zero-order, first-order, and second-order empirical models to identify the rate law that best describes the reaction. Reusability tests showed that MgAl–LDH maintains high activity over multiple cycles, with only a moderate decline, demonstrating its stability and suitability for practical wastewater treatment applications.