A Review of Thermal Aspects and System Coupling in Thermoelectric Generators

There has been a rising trend for recovering waste heat, especially after the invention of new types of semiconductors. Among all available utilization options, thermoelectric generation (TEG) systems are promising for recovering waste heat. Thermoelectric devices are environment-friendly, operate silently, and are suitable for low- to high-power applications. This review paper presents a comprehensive study of TEGs, starting with the current problem, state of the art, advantages, disadvantages, generation and related principles, and applications, and covers different arrangements (individual and combined) and working fluids. Furthermore, this article systematically covered various experimental and numerical studies, including optimization, offering insights into heat exchanger configurations, working fluids, and performance parameters. Here, an effort is made to describe the contributions of individual/coupled TEG systems. As a coupled system, the individual TEG system is used with other systems like solar, distillation, solar pond, etc., for cogeneration and enhanced efficiency. The thermal/system parameters of individual/coupled systems are thoroughly discussed, and their impact on efficiency and power generation is illustrated. It was found that the design of the heat exchanger configuration varies from plate type to an efficient liquid-based electricity generation system in these TEG systems. The working fluid inside the fluid loop of a thermoelectric generation system varies from simple fluids to nanofluids. The current state of thermoelectric generation technology is facing challenges in module materials, equipment cost optimization, and commercialization. The progressive TEG generation capabilities have improved with recent advancements in these areas. The power densities are increasing from 0.5 to 1.2 W/cm2 in earlier standalone TEGs to 2.5–4.8 W/cm2 in recent optimized hybrid configurations, and overall system efficiencies are rising from an average of 5.2% (standalone) to 18.7% in coupled solar-TEG or waste heat recovery systems. The reported maximum ZT values are also improved from ∼1.2 to 2.1–2.8 in next-generation materials. Liquid-based heat exchangers in conjunction with nanofluids are the most efficient way to maximize temperature gradient coefficient (0.75–0.92) and minimize parasitic losses. While flexible, ionic, and hybrid next-generation material platforms are still in the early phases of development (TRL 3–5), liquid-based heat exchanger systems improved with nanofluids are closest to commercialization (Technology Readiness Level, TRL 6–8). Therefore, further research in these areas is required to mitigate these challenges. Finally, the recent developments in the thermoelectric generation field and future research direction are briefly discussed.