Plasma Electrolytic Oxidation Coatings: Tribological Properties, Engineering Applications, and Future Innovations

Plasma electrolytic oxidation (PEO) has emerged as a leading surface engineering technology for improving the tribological and corrosion performance of lightweight structural alloys, including aluminum, magnesium, titanium, and zirconium. Unlike conventional anodizing or line-of-sight deposition processes, PEO forms thick, multiphase ceramic oxide coatings metallurgically bonded to the substrate through plasma-assisted in situ oxidation, enabling treatment of complex and internal geometries that competing technologies cannot reach. The tribological performance of PEO coatings is governed by coupled interactions among electrolyte chemistry, electrical discharge behavior, phase evolution, porosity development, and residual stress state. This review critically evaluates the friction, wear, and tribo-corrosion behavior of PEO coatings under dry sliding, lubricated, high-temperature, marine, and vacuum environments, and systematically examines the influence of processing parameters, microstructural evolution, transfer layer formation, and counterface interactions on coating performance. Hybrid and duplex systems incorporating solid lubricants, polymer impregnation, sol–gel sealing, and multilayer architectures are discussed as strategies to overcome limitations associated with brittleness and surface porosity. Current research challenges, including fatigue degradation, coating defect control, limited cross-study standardization, and incomplete mechanistic understanding of process–microstructure, tribological relationships, are critically assessed. Emerging directions encompassing self-lubricating adaptive coatings, AI-guided process optimization, and multifunctional hybrid architectures are highlighted as pathways toward next-generation surface systems. This review provides a mechanism-based framework for understanding tribological behavior in PEO coatings and identifies critical opportunities for future industrial implementation in aerospace, automotive, marine, biomedical, and energy applications.