Sustainable Development of Paver Blocks Using Fly Ash and Plastic Waste: Strength, Durability, and Cost Analysis

This study investigates the combined use of fly ash (FA) and plastic waste (PW) as partial replacements for cement and coarse aggregates in the production of paver blocks. Experimental mixes were developed with a substitution level of FA (10% to 30%) and PW (3% to 15%). The performance of the modified concrete block was evaluated in terms of compressive strength (CS), flexural strength (FS), ultrasonic pulse velocity (UPV), water absorption (WA), Cantabro abrasion resistance (CAR), and rapid chloride permeability test (RCPT). Experimental results revealed that the optimal mixture, containing 25% FA and 12% PW (M4), exhibited superior performance. Compared with the control mix, the 56-day compressive and flexural strengths increased by 14.1% and 15.3%, respectively. The UPV value increased to 5.1 km/s, indicating improved concrete quality and matrix densification. Durability performance was significantly enhanced, with water absorption reduced by 25.4%, Cantabro abrasion mass loss decreased by 23.7%, and chloride ion penetrability reduced by 50.0% at 56 days. Statistical analysis using two-way ANOVA confirmed that FA and PW contents significantly influenced paver block performance (p < 0.05). The economic assessment further demonstrated cost savings of up to 3.0% compared with conventional concrete paver blocks. The study demonstrates that FA and PW can be effectively valorized in paver block production, offering both economic and environmental benefits. This green approach supports sustainable construction practices and promotes efficient waste management.