Mechanical Performance and Pore Structure of Basalt-Fiber-Reinforced Recycled Aggregate Concrete with Pretreated 100% Recycled Coarse Aggregate: Effect of Mixed Fiber Lengths

Basalt-fiber-reinforced recycled aggregate concrete (BFRAC) produced with 100% recycled coarse aggregate is still constrained by the inferior quality of recycled aggregate and the difficulty of optimizing fiber reinforcement parameters. This study investigated the effects of basalt fiber length configuration and dosage on the mechanical performance and pore structure of recycled aggregate concrete incorporating recycled coarse aggregate subjected to two-step pretreatment with nano-silica and cement slurry. Four fiber length configurations, namely 6, 12, and 24 mm and a mixed-length system, were evaluated at volume fractions of 0.1, 0.2, and 0.3%. The reinforcing effect was assessed through compressive strength, splitting tensile strength, scanning electron microscopy, mercury intrusion porosimetry, and statistical analysis. The pretreatment improved recycled aggregate quality, reducing water absorption from 4.97% to 3.11% and crushing index from 20.5% to 13.4%. Basalt fiber incorporation generally enhanced mechanical performance, although the response depended on fiber length and dosage. At 28 days, BF24V1 achieved the highest compressive strength, whereas BFmixV1 exhibited the best overall performance by combining high compressive strength with the highest splitting tensile strength. Relative to the average performance of the corresponding single-length mixtures at the same dosage, the mixed-length system showed a positive synergistic effect. Microstructural observations indicated that this behavior was associated with more effective crack bridging and refinement of the pore-size distribution. The results demonstrate that a low-dosage mixed-length basalt fiber system provides an effective route for upgrading pretreated waste-derived aggregate into higher-performance recycled aggregate concrete.