Development of commingled hoop-wound composites-reinforced O-rings (CRO) for aeronautical application
Abstract Traditional elastomeric O-rings, although widely employed in aerospace sealing applications, are often limited by its inadequate chemical resistance, thermal stability, mechanical resistance and durability under extreme operating conditions. This article proposes the development of high-performance composites for O-ring reinforcement using carbon fiber/polyether ether ketone and glass fiber/polyamide commingled technologies engineered to address current limitations by integrating elastomeric materials with continuous reinforcements tailored for the demanding environments of aerospace systems. A novel pre-compaction device (machine head) for commingled tows was designed and developed for using at filament winding technique, which was used to manufacture the reinforcement inner section of the O-rings. Final compaction level of commingled composites was carried out using compression molding to meet aeronautical requirements. The materials were characterized by SEM and thermal analysis as DSC. O-ring reinforcements made from 3D-printed carbon fiber/Onyx and glass fiber/Onyx by Markforged® printer were also manufactured and tested, indicating the improvement of O-rings performance when used commingled technology. Using 3D-printing resources, a hermetic mold was created to combine the composites reinforcement with the silicon-based elastomeric covering. Finally, composites reinforced O-rings were submitted to tensile testing, based on ASTM D2290 procedures, and a comparison of the resulting mechanical properties revealed superior performance of the commingled reinforcements.
Authors
- Antônio Carlos Ancelotti (ORCID: https://orcid.org/0000-0003-2031-419X)
- Ricardo Mello Di Benedetto (ORCID: https://orcid.org/0000-0002-0955-809X)
- Túlio Hallak Panzera (ORCID: https://orcid.org/0000-0001-7091-456X)
- Thiago de Freitas SILVANO (ORCID: https://orcid.org/0009-0008-2885-8689)
- Anderson Janotti (ORCID: https://orcid.org/0000-0002-0358-2101)
- Rubens Augusto Carvalho Rafanhim
Institutions
- Federal University of São João del-Rei (BR)
- Federal University of São João del-Rei (BR)
- Universidade Federal de Itajubá (BR)
- University of Delaware (US)
Publication Details
- Journal
- Mechanics of Composite Materials
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1007/s11029-026-10423-w
- Primary Topic
- Fiber-reinforced polymer composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Fundação de Amparo à Pesquisa do Estado de Minas Gerais