Field evaluation of 1-methylnaphthalene as a performance enhancer for diethylamine corrosion inhibitor in oil production facilities
Background This study evaluates the effectiveness of 1-methylnaphthalene (1-MN) as a performance enhancer for diethylamine (DEA)-based corrosion inhibition in oil production header systems under actual operating conditions. The field assessment compared 30 ppm DEA alone with DEA supplemented with 1-MN at concentrations of 2–5%. Results Corrosion coupons, online corrosion monitoring, fluid analysis, and X-ray diffraction (XRD) were used to evaluate corrosion performance and characterize corrosion products. Following the addition of 1-MN, the corrosion rate decreased from 25 to 14 mpy at the HP Wet Separator #01 inlet, from 9 to 2 mpy at the LP Wet Separator #03 outlet, and from 4 to less than 1 mpy at the LP Dry Separator #04 outlet. Fluid analysis also indicated lower total iron concentrations and higher corrosion inhibitor residuals. XRD analysis showed an increase in relative magnetite (Fe₃O₄) content from 50.1% to 53.9%, a decrease in troilite (FeS) from 26.1% to 18.2%, and the disappearance of goethite, which had previously been detected at 1.8%. Conclusions The findings indicate that incorporating 1-MN into an existing DEA-based corrosion inhibition program can improve corrosion control under actual oilfield operating conditions. This approach enhance inhibition performance and offer potential reductions in chemical consumption and operating costs.
Authors
- Adham Mohamed Nagiub (ORCID: https://orcid.org/0000-0002-8894-8693)
- Rabeea D. Abdel‐Rahim (ORCID: https://orcid.org/0000-0002-6464-3131)
- YAHIA Z ABDELNASER
Institutions
- Al-Azhar University (EG)
Publication Details
- Journal
- Bulletin of the National Research Centre/Bulletin of the National Research Center
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1186/s42269-026-01522-8
- Primary Topic
- Corrosion Behavior and Inhibition
- Type
- article
- Field-Weighted Citation Impact
- 0.00