Coupled optical–geometric disorder transfer in amorphous oxides
Abstract Amorphous SnOₓ thin films deposited by spray pyrolysis were used as a model disordered oxide system to examine annealing-induced scale-dependent changes within a two-channel optical–geometric interpretive framework combining model-free optical edge-shape metrics with differential-geometric scanning electron microscopy descriptors. Films were deposited on glass at 350 °C and annealed in air at 450 °C for 1 h to probe thermal relaxation in a disordered oxide network. Four complementary probes were employed: ultraviolet–visible spectroscopy to quantify optical-edge broadening directly from measured transmittance and absorbance, energy-dispersive X-ray spectroscopy to track relative compositional changes, field-emission scanning electron microscopy to image micro- and nanostructure, and a differential-geometric formalism that maps microscopy intensity fields into descriptors of interface density, curvature activity, anisotropy, and hierarchical structural organization. Because band-edge fits in highly transparent oxide films on glass can be sensitive to baseline offsets and fitting-window selection, disorder was quantified directly from normalized edge-shape descriptors extracted from the measured optical edge. Annealing sharpened the optical edge, while energy-dispersive X-ray spectroscopy indicated oxygen enrichment together with suppression of the residual chlorine-related signal, consistent with chemical stabilization. In contrast, microscopy-derived descriptors revealed a scale-dependent geometric response: coarse-scale heterogeneity decreased, whereas interface- and curvature-sensitive complexity increased at higher magnifications and anisotropy decreased. Distributional, correlation-length, and spectral analyses, together with patch-level spatial resampling of representative microscopy fields, were consistent with a scale-dependent disorder-redistribution interpretation within the present dataset and provided an internal consistency check under fixed imaging conditions.
Authors
- Telmo Eleutério (ORCID: https://orcid.org/0000-0001-5680-9843)
- Maria Gabriela Meirelles (ORCID: https://orcid.org/0000-0001-9356-3045)
- Reşit Özmenteş (ORCID: https://orcid.org/0000-0002-5893-0660)
- Helena Cristina Vasconcelos (ORCID: https://orcid.org/0000-0001-5935-870X)
Publication Details
- Journal
- Applied Physics A
- Published
- 2026-06-17
- DOI
- https://doi.org/10.1007/s00339-026-09720-x
- Primary Topic
- Surface Roughness and Optical Measurements
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Bitlis Eren Üniversitesi