The Deep Prediction of the Tonglushan Deposit Based on the Wide-Field Electromagnetic Method and Radiometric Spectrometry Measurements

The Tonglushan ore field is an important component of the polymetallic mineralization belt in the middle and lower reaches of the Yangtze River in China. The skarn-type Cu, Fe, Au, and Mo molybdenum deposits are mainly developed in the contact zone between the rock mass and the strata, as well as in the contact zone between residual and capturing bodies in the rock body. The distribution of ore bodies is controlled by faults and strata, but there is a lack of large-scale geophysical information on the contact relationship between the ore-forming geological body and the host rock and on the deep spatial morphology of the ore-forming structure and intrusion rock. The study uses the JS-WEM2 wide-field electromagnetic instrument and the RS230 spectrometer to conduct the ground frequency domain electromagnetic and radiometric spectrometry measurements on four profiles. The measurement results indicate that the fault distribution in the Tonglushan ore field is predominantly in the NW-trending and NE-trending directions. The NW-trending Tonglushan–Lijiashan fault (F2) is a steeply dipping fault; the NE-trending faults are minor, with steep dips, generally extending no deeper than −1000 m. The Tonglushan stock exhibits the northeastward uplift, characterized by southward overlap and southeastward dip. The deep resistivity is greater than 3000 Ω·m, while the resistivity below −1000 m is less than 2000 Ω·m due to the fault influence. The ore bodies are mainly distributed along the contact zones where variations in the occurrence of the rock intersect with the strata. On resistivity profiles, these zones show the gradient variation in resistivity and the distorted shape of the resistivity contour line. The radioactive element contents of wall rock above the ore bodies are characterized by high U, high Th, and low K. The Wide-Field Electromagnetic Method (WFEM) can effectively detect the distribution and morphology of rocks and faults, and combined with the radioactive characteristics of geological bodies, it can effectively identify concealed faults and the favorable mineralization target areas. Novelty: The study combines the WFEM with radiometric measurements to reduce uncertainty in exploration compared to using only one method. It improves the detection accuracy and target identification ability of deep hidden ore bodies, providing the new technical method for deep mineral exploration in complex structural areas.