Study on the Properties of High-Strength Slag-Fly Ash-Based Geopolymer Concrete After Exposure to Elevated Temperatures

The construction industry contributes significantly to global CO2 emissions, primarily due to the production of ordinary Portland cement (OPC). As a sustainable alternative, geopolymer concrete, utilizing industrial by-products, such as ground granulated blast furnace slag (GGBFS) and fly ash (FA), has attracted increasing attention. However, studies on the post-fire behavior of high-strength slag–fly ash-based geopolymer concrete (HSSFGC) remain limited. In this study, two HSSFGC mixtures with FA contents of 10% and 30% were prepared and exposed to elevated temperatures of 100 °C, 300 °C, 450 °C, and 600 °C. After natural cooling, mass loss, ultrasonic pulse velocity (UPV), residual compressive strength, and microstructural evolution were investigated using XRD, FTIR, TGA, SEM, and EDS techniques. The results show that as temperature increases, mass loss and internal defects also increase, accompanied by deterioration of the interfacial transition zone (ITZ). At 100–300 °C, specimens with higher FA content exhibited improved residual compressive strength due to secondary geopolymerization of unreacted FA. However, above 300 °C, all specimens experienced significant strength degradation, with residual compressive strength at 600 °C reduced to 57% for FA-10 and 49% for FA-30 of their respective room-temperature values. This mix-specific difference, attributed to higher pore connectivity and more severe dehydroxylation in FA-30. These findings reveal the temperature-dependent degradation mechanisms of HSSFGC and provide a theoretical basis for post-fire assessment and sustainable engineering applications.