Structural Design and Performance Evaluation of a Janus Silica-Based Nanosheet Composite Viscosity Reducer

Aiming at the characteristics of high viscosity and poor fluidity of high waxy ordinary heavy oil, a Janus silica-based nanosheet composite viscosity reducer was designed and prepared in this paper. The viscosity reducer was assembled by asymmetric Gemini viscosity reducer and silica nanosheets through dehydration condensation reaction, and its structure was verified by FT-IR, 1HNMR, XPS and DLS. The viscosity reduction performance, emulsion stability, interfacial tension and flow performance of the viscosity reducer were systematically evaluated by taking heavy oil with wax content of 35.7% and viscosity of 237 mPa·s at 30 °C as the research object. The results showed that, at an oil-to-viscosity-reducer-solution volume ratio of 3:7 and a viscosity reducer mass fraction of 0.3%, the maximum viscosity reduction rate reached 94.5% at 30 °C, calculated relative to the viscosity of the dehydrated original heavy oil. The oil–water interfacial tension was significantly reduced, and the 24 h bleeding ratio, defined as the volume percentage of separated water relative to the initial aqueous phase volume, was only 7.3%, indicating good emulsion stability. The core flow experiment shows that the resistance coefficient is reduced to the lowest at 0.3% concentration, and the seepage capacity is significantly improved. The analysis of total hydrocarbon gas chromatography showed that the content of high-carbon wax components in the C23-C30 range decreased by 4.79 percentage points after treatment, indicating that the viscosity reducer preferentially interacted with high-carbon wax molecules and promoted wax-crystal dispersion, thereby weakening the three-dimensional wax-crystal network. The viscosity reducer has the synergistic effect of dispersing wax crystals, reducing interfacial tension and stabilizing emulsification, which provides a low-cost and high-performance technical approach for the efficient exploitation of high waxy ordinary heavy oil.

Authors

Institutions

Publication Details

Journal
Molecules
Published
2026-06-12
DOI
https://doi.org/10.3390/molecules31122061
Primary Topic
Enhanced Oil Recovery Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Structural Design and Performance Evaluation of a Janus Silica-Based Nanosheet Composite Viscosity Reducer

Jingchun Wu, Liyuan Cai, Miaoxin Zhang, Zhao Yang et al.
Molecules
Enhanced Oil Recovery Techniques
article

Structural Design and Performance Evaluation of a Janus Silica-Based Nanosheet Composite Viscosity Reducer

Jingchun Wu, Liyuan Cai, Miaoxin Zhang, Zhao Yang, Fang Shi, Bo Li, Chunlong Zhang, Fengshan Guo
article en

Abstract

Aiming at the characteristics of high viscosity and poor fluidity of high waxy ordinary heavy oil, a Janus silica-based nanosheet composite viscosity reducer was designed and prepared in this paper. The viscosity reducer was assembled by asymmetric Gemini viscosity reducer and silica nanosheets through dehydration condensation reaction, and its structure was verified by FT-IR, 1HNMR, XPS and DLS. The viscosity reduction performance, emulsion stability, interfacial tension and flow performance of the viscosity reducer were systematically evaluated by taking heavy oil with wax content of 35.7% and viscosity of 237 mPa·s at 30 °C as the research object. The results showed that, at an oil-to-viscosity-reducer-solution volume ratio of 3:7 and a viscosity reducer mass fraction of 0.3%, the maximum viscosity reduction rate reached 94.5% at 30 °C, calculated relative to the viscosity of the dehydrated original heavy oil. The oil–water interfacial tension was significantly reduced, and the 24 h bleeding ratio, defined as the volume percentage of separated water relative to the initial aqueous phase volume, was only 7.3%, indicating good emulsion stability. The core flow experiment shows that the resistance coefficient is reduced to the lowest at 0.3% concentration, and the seepage capacity is significantly improved. The analysis of total hydrocarbon gas chromatography showed that the content of high-carbon wax components in the C23-C30 range decreased by 4.79 percentage points after treatment, indicating that the viscosity reducer preferentially interacted with high-carbon wax molecules and promoted wax-crystal dispersion, thereby weakening the three-dimensional wax-crystal network. The viscosity reducer has the synergistic effect of dispersing wax crystals, reducing interfacial tension and stabilizing emulsification, which provides a low-cost and high-performance technical approach for the efficient exploitation of high waxy ordinary heavy oil.

MoleculesVol. 31(12)
Northeast Petroleum University (CN)
National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang Province
Openalex Percentile: Top 7%
Enhanced Oil Recovery Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.