A novel optical scanning system for laser machining of vertical sidewall

Despite its many advantages, laser micromachining has limitations, such as tapering due to plasma-induced distortion, gaussian beam profiles, and defocusing effects. Although process parameter optimization and adjusting the angle-of-incidence (AOI) have been investigated to reduce tape angle of the sidewall, existing approaches often require complex process optimization, workpiece tilting, or multi-axis scanning systems. In this study, we developed a novel optical scanning system consisting of three spherical lenses and a 2D galvanometer scanner to enable AOI variation using a simplified optical configuration. To overcome the tapering limitations of machined surfaces, this study developed a novel optical scanning system and proposed a derived machining process. The proposed optical scanning system controls the AOI of the laser beam on the sample surface through a novel arrangement of spherical lenses. The experimentally measured AOI showed good agreement with the optical simulation, confirming the validity of the proposed optical system. Under optimized machining conditions of a fluence of 2.97 J/cm 2 , an overlap ratio of 10 %, and a scan number of 100, a near-vertical sidewall with a taper angle of 0.7° was achieved at an AOI of 4.058°. Furthermore, we observed that the taper angle during machining was highly sensitive to the AOI. The proposed method has the potential to limit the formation of taper angles in conventional laser machining and enhance industrial applicability through an optical design-based AOI control system.

Authors

Institutions

Publication Details

Journal
Optics & Laser Technology
Published
2026-11-21
DOI
https://doi.org/10.1016/j.optlastec.2026.117095
Primary Topic
Laser Material Processing Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A novel optical scanning system for laser machining of vertical sidewall

Dongsik Kim, Jeonghong Ha, Hyun Choi, Jaehee Kim
3 links
Optics & Laser Technology
Laser Material Processing Techniques
article

A novel optical scanning system for laser machining of vertical sidewall

Dongsik Kim, Jeonghong Ha, Hyun Choi, Jaehee Kim
article en

Abstract

Despite its many advantages, laser micromachining has limitations, such as tapering due to plasma-induced distortion, gaussian beam profiles, and defocusing effects. Although process parameter optimization and adjusting the angle-of-incidence (AOI) have been investigated to reduce tape angle of the sidewall, existing approaches often require complex process optimization, workpiece tilting, or multi-axis scanning systems. In this study, we developed a novel optical scanning system consisting of three spherical lenses and a 2D galvanometer scanner to enable AOI variation using a simplified optical configuration. To overcome the tapering limitations of machined surfaces, this study developed a novel optical scanning system and proposed a derived machining process. The proposed optical scanning system controls the AOI of the laser beam on the sample surface through a novel arrangement of spherical lenses. The experimentally measured AOI showed good agreement with the optical simulation, confirming the validity of the proposed optical system. Under optimized machining conditions of a fluence of 2.97 J/cm 2 , an overlap ratio of 10 %, and a scan number of 100, a near-vertical sidewall with a taper angle of 0.7° was achieved at an AOI of 4.058°. Furthermore, we observed that the taper angle during machining was highly sensitive to the AOI. The proposed method has the potential to limit the formation of taper angles in conventional laser machining and enhance industrial applicability through an optical design-based AOI control system.

Optics & Laser TechnologyVol. 206
Pohang University of Science and Technology (KR), Gyeongsang National University (KR), Korea University of Science and Technology (KR), Korea Institute of Industrial Technology (KR)
Laser Material Processing Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
A novel optical scanning system for laser machining of vertical sidewall — Dongsik Kim, Jeonghong Ha, et al. · Optics & Laser Technology (2026) | TGRS Research Map | TGRS