Evaluation of spatial frequency response based resolution measurement in honeycomb-patterned endoscopic images

This study presents a technical evaluation of the edge-based Spatial Frequency Response (e-SFR) method for determining the resolution of fibre-bundle endoscopes (fibrescope). The analysis focuses on the precision and reliability of measurements affected by the inherent honeycomb-like sampling pattern of fibre-bundle imaging systems. Direct application of the e-SFR method to honeycomb-patterned images resulted in significant edge-detection failures and large deviations. A modified implementation of the SFRMAT5 algorithm, incorporating filtration for improved edge detection, was evaluated using synthetic test images. Although the averaged results yielded errors below 10% within the 0.04–0.25 cycles/pixel range, the procedure was time-consuming and required repeated manual adjustments of the Region of Interest (ROI), along with defining data rejection criteria that remain subject to operator bias. Outside this range, inaccuracies reached up to 38%. The introduction of morphological pre-filtration improved robustness, enabling consistent SFR50 estimation with errors below 10% in the 0.02-0.06 cycles/pixel range in the test with synthesised images. However, application to real fibre-bundle endoscope data revealed limited reliability. Measured SFR50 values with the rejection-averaging method (range 0.0168-0.0210 cycles/pixel) fell within high-error regions identified in synthesised image assessment, resulting in weak correlation with the limiting resolution. While filtered approaches improved trend consistency (up to a correlation of r = 0.889), they did not ensure accurate resolution estimation. These results demonstrate that the standard e-SFR method is unsuitable for fibre-bundle endoscopes without substantial modification. Further work is required to establish a validated reference methodology and improve the absolute accuracy of resolution measurements for fibre-bundle imaging systems.

Authors

Institutions

Publication Details

Journal
Optics and Lasers in Engineering
Published
2026-11-18
DOI
https://doi.org/10.1016/j.optlaseng.2026.110246
Primary Topic
Image and Video Quality Assessment
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Evaluation of spatial frequency response based resolution measurement in honeycomb-patterned endoscopic images

Bartosz Jakubek, Bartosz Wojciechowski
Optics and Lasers in Engineering
Image and Video Quality Assessment
article

Evaluation of spatial frequency response based resolution measurement in honeycomb-patterned endoscopic images

Bartosz Jakubek, Bartosz Wojciechowski
article en

Abstract

This study presents a technical evaluation of the edge-based Spatial Frequency Response (e-SFR) method for determining the resolution of fibre-bundle endoscopes (fibrescope). The analysis focuses on the precision and reliability of measurements affected by the inherent honeycomb-like sampling pattern of fibre-bundle imaging systems. Direct application of the e-SFR method to honeycomb-patterned images resulted in significant edge-detection failures and large deviations. A modified implementation of the SFRMAT5 algorithm, incorporating filtration for improved edge detection, was evaluated using synthetic test images. Although the averaged results yielded errors below 10% within the 0.04–0.25 cycles/pixel range, the procedure was time-consuming and required repeated manual adjustments of the Region of Interest (ROI), along with defining data rejection criteria that remain subject to operator bias. Outside this range, inaccuracies reached up to 38%. The introduction of morphological pre-filtration improved robustness, enabling consistent SFR50 estimation with errors below 10% in the 0.02-0.06 cycles/pixel range in the test with synthesised images. However, application to real fibre-bundle endoscope data revealed limited reliability. Measured SFR50 values with the rejection-averaging method (range 0.0168-0.0210 cycles/pixel) fell within high-error regions identified in synthesised image assessment, resulting in weak correlation with the limiting resolution. While filtered approaches improved trend consistency (up to a correlation of r = 0.889), they did not ensure accurate resolution estimation. These results demonstrate that the standard e-SFR method is unsuitable for fibre-bundle endoscopes without substantial modification. Further work is required to establish a validated reference methodology and improve the absolute accuracy of resolution measurements for fibre-bundle imaging systems.

Optics and Lasers in EngineeringVol. 209
Poznań University of Technology (PL)
Ministerstwo Edukacji i Nauki
Good health and well-being
Image and Video Quality Assessment
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon