Multi-Model Assessment and Experimental Validation of a Custom High-Camber Airfoil for Wind-Lens Technology Application

Diffusers in diffuser-augmented wind turbines (DAWTs) require high-camber airfoils operating at low Reynolds numbers (Re), and their laminar separation bubbles (LSB) significantly complicate aerodynamic predictions. No prior study has experimentally validated XFOIL, k-ω SST, and γ-Re_θ models against simultaneous lift, drag, and chord-wise pressure coefficient (Cp) measurements for the customized high-camber airfoil at Re = 68,000 (68k), 118,000 (118k), and 159,000 (159k). Lift, drag, and Cp distributions were measured experimentally. The γ-Re_θ model demonstrated superior performance, achieving a lift maximum absolute percent error of 1.6–3.4%, near-zero bias, and a coefficient of determination >0.99. It accurately captured the LSB pressure plateau at mid-chord, with mean gross-averaged Cp percent errors of 8.1% and 2.1% for upper and lower surfaces, respectively. The k-ω SST model overpredicted lift by up to +9.8% at Re = 68k and underpredicted drag by up to 66%. XFOIL is unreliable specifically for separated transitional flows at Re < 118k, but improves at Re = 159k. The experimental dataset and validated transition-sensitive RANS approach provide a foundation for low-Re airfoil and DAWT diffuser design. Future work should extend measurements below Re = 50k and above 200k, including post-stall conditions, and system-level design of DAWT.