Analysis of Tension Piles Supporting Large Structures Using Parabolic Soil Model and Elastic–Perfectly Plastic Pile Material

Large civil infrastructures, including high-rise buildings, bridges, offshore platforms, transmission towers, tall chimneys, basements below the water table, etc., are often supported on pile foundations. Apart from the usual dead loads and live loads imposed by superstructures, these piles are often subjected to significant uplift forces due to overturning moments or hydrostatic pressure resulting from the effects of wind and wave loading, traffic movement, buoyancy, etc. Piles that withstand tensile loads are termed tension piles. Since the soil is unable to resist tensile stress, the pullout loads imposed on tension piles are prevented primarily by downward skin friction at the pile–soil interface, as well as by the self-weight of the piles. In this paper, a numerical model was developed using boundary element analysis, wherein piles were assumed to be made of an elastic–perfectly plastic material, and the soil was modeled using a parabolic model. The developed model was validated with available experimental results, and acceptable agreement was found. An in-depth study by detailed parametric analysis revealed that the parabolic soil model yielded satisfactory results. Extensive full-scale case studies were also performed to study the influence of various factors on tension pile performance. A set of important conclusions was drawn from the entire work.