Enhanced Photocatalytic Hydrogen Evolution in Hybrid Hydrogels Coated with an Electrospun PVDF Fibrous Layer with an Unconnected Porous Structure via Multiple Scattering and Water Retention

Efficient photocatalytic hydrogen evolution in hybrid hydrogels containing photocatalysts remains a challenge due to the rapid loss of water and poor light harvesting. To overcome this drawback, an electrospun poly(vinylidene fluoride) (PVDF) fibrous layer with an unconnected porous structure is coated on hybrid hydrogels to improve the photocatalytic hydrogen evolution. The hybrid hydrogels are prepared by the thermally initiated polymerization of the monomers poly(ethylene glycol) methyl ether methacrylate (OEGM 300 ) and di(ethylene glycol) methyl ether methacrylate (MEO 2 MA) with g-C 3 N 4 /Pt nanosheets. After that, an electrospun PVDF fibrous layer with a porous structure is constructed on the hydrogel surface by first electrospinning a solution containing PVDF and poly(ethylene oxide) (PEO) and then removing PEO. To optimize photocatalytic performance, the weight fraction of PEO is increased from 0.2 to 0.5 and finally to 0.8. Simultaneously, the porous structure in the nanofibers switches from an unconnected to a fully connected state. Due to the existence of unconnected pores in the PVDF fibrous layer, the evaporated water molecules from hydrogels can be captured and returned to the liquid state. They act as tiny mirrors to reflect the light scattered from the hydrogel surface. Thus, light harvesting is enhanced. The hydrogen evolution rate prominently increases to 3491 μmol h –1 g –1, which is almost double that without a fibrous layer covering. In addition, evaporation also slows down due to cycles of evaporation and condensation of water molecules. The weight loss of hybrid hydrogels coated with an electrospun PVDF 0.5 fibrous layer with an unconnected porous structure is only 43.5% to that without any PVDF fibrous layer. It significantly prolongs the lifetime. For this reason, the present hybrid hydrogel system is well suited for photocatalytic hydrogen evolution in deserts and prairies, which are rich in solar energy but lack water.

Authors

Institutions

Publication Details

Journal
ACS Applied Materials & Interfaces
Published
2026-06-08
DOI
https://doi.org/10.1021/acsami.6c07366
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Enhanced Photocatalytic Hydrogen Evolution in Hybrid Hydrogels Coated with an Electrospun PVDF Fibrous Layer with an Unconnected Porous Structure via Multiple Scattering and Water Retention

Qi Zhong, Jie Yu, Lin Lei, Weijia Wang et al.
ACS Applied Materials & Interfaces
Advanced Photocatalysis Techniques
article

Enhanced Photocatalytic Hydrogen Evolution in Hybrid Hydrogels Coated with an Electrospun PVDF Fibrous Layer with an Unconnected Porous Structure via Multiple Scattering and Water Retention

Qi Zhong, Jie Yu, Lin Lei, Weijia Wang, Huiqing Fan, Peter Müller-Buschbaum
article en

Abstract

Efficient photocatalytic hydrogen evolution in hybrid hydrogels containing photocatalysts remains a challenge due to the rapid loss of water and poor light harvesting. To overcome this drawback, an electrospun poly(vinylidene fluoride) (PVDF) fibrous layer with an unconnected porous structure is coated on hybrid hydrogels to improve the photocatalytic hydrogen evolution. The hybrid hydrogels are prepared by the thermally initiated polymerization of the monomers poly(ethylene glycol) methyl ether methacrylate (OEGM 300 ) and di(ethylene glycol) methyl ether methacrylate (MEO 2 MA) with g-C 3 N 4 /Pt nanosheets. After that, an electrospun PVDF fibrous layer with a porous structure is constructed on the hydrogel surface by first electrospinning a solution containing PVDF and poly(ethylene oxide) (PEO) and then removing PEO. To optimize photocatalytic performance, the weight fraction of PEO is increased from 0.2 to 0.5 and finally to 0.8. Simultaneously, the porous structure in the nanofibers switches from an unconnected to a fully connected state. Due to the existence of unconnected pores in the PVDF fibrous layer, the evaporated water molecules from hydrogels can be captured and returned to the liquid state. They act as tiny mirrors to reflect the light scattered from the hydrogel surface. Thus, light harvesting is enhanced. The hydrogen evolution rate prominently increases to 3491 μmol h –1 g –1, which is almost double that without a fibrous layer covering. In addition, evaporation also slows down due to cycles of evaporation and condensation of water molecules. The weight loss of hybrid hydrogels coated with an electrospun PVDF 0.5 fibrous layer with an unconnected porous structure is only 43.5% to that without any PVDF fibrous layer. It significantly prolongs the lifetime. For this reason, the present hybrid hydrogel system is well suited for photocatalytic hydrogen evolution in deserts and prairies, which are rich in solar energy but lack water.

ACS Applied Materials & Interfaces
Zhejiang Sci-Tech University (CN), Northwestern Polytechnical University (CN), Laboratoire de physique des Solides (FR), Technical University of Munich (DE)
National Natural Science Foundation of China
Clean water and sanitation
Openalex Percentile: Top 18%
Advanced Photocatalysis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.