Thermal enhancement mechanisms in a heat exchanger installed with gear-ring turbulence promoters

The heat transfer enhancement and pressure loss characteristics of a tube fitted with two novel gear-shaped turbulators, namely the gear ring inner (GRI) and gear ring outer, were experimentally and numerically investigated. This study addresses a research gap by systematically evaluating the effects of gear geometry on thermal performance over a wide range of turbulent flow conditions (Re = 6000–20,000). The investigated parameters included three numbers of teeth (N = 4, 6, and 8) and three pitch ratios (PR = 2, 3, and 4). The results demonstrate that the insertion of gear-ring turbulators substantially intensifies fluid mixing and disrupts both the thermal and hydrodynamic boundary layers compared to a smooth tube, thereby enhancing convective heat transfer. Depending on the gear configuration, tooth number, and pitch ratio, the Nusselt number increases by 1.82–2.67 times relative to the smooth tube. This enhancement, however, is accompanied by an increase in pressure loss, with the friction factor rising by 8.37–12.53 times. Among the investigated configurations, the GRI insert with N = 8 and PR = 2 at Re = 6000 achieves the highest thermal performance factor of 1.16.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-19
DOI
https://doi.org/10.1038/s41598-026-71851-1
Primary Topic
Heat Transfer Mechanisms
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Thermal enhancement mechanisms in a heat exchanger installed with gear-ring turbulence promoters

Monsak Pimsarn, Smith Eiamsa–ard, Varesa Chuwattanakul, Prachya Samruaisin et al.
1 links
Scientific Reports
Heat Transfer Mechanisms
article

Thermal enhancement mechanisms in a heat exchanger installed with gear-ring turbulence promoters

Monsak Pimsarn, Smith Eiamsa–ard, Varesa Chuwattanakul, Prachya Samruaisin, Paisarn Naphon, Pitak Promthaisong, Suriya Chokphoemphun, M. Kumar
article en

Abstract

The heat transfer enhancement and pressure loss characteristics of a tube fitted with two novel gear-shaped turbulators, namely the gear ring inner (GRI) and gear ring outer, were experimentally and numerically investigated. This study addresses a research gap by systematically evaluating the effects of gear geometry on thermal performance over a wide range of turbulent flow conditions (Re = 6000–20,000). The investigated parameters included three numbers of teeth (N = 4, 6, and 8) and three pitch ratios (PR = 2, 3, and 4). The results demonstrate that the insertion of gear-ring turbulators substantially intensifies fluid mixing and disrupts both the thermal and hydrodynamic boundary layers compared to a smooth tube, thereby enhancing convective heat transfer. Depending on the gear configuration, tooth number, and pitch ratio, the Nusselt number increases by 1.82–2.67 times relative to the smooth tube. This enhancement, however, is accompanied by an increase in pressure loss, with the friction factor rising by 8.37–12.53 times. Among the investigated configurations, the GRI insert with N = 8 and PR = 2 at Re = 6000 achieves the highest thermal performance factor of 1.16.

Scientific Reports
Mahasarakham University (TH), Kasetsart University (TH), Mahanakorn University of Technology (TH), Graphic Era University (IN), Srinakharinwirot University (TH), King Mongkut's Institute of Technology Ladkrabang (TH)
Industry, innovation and infrastructure
Heat Transfer Mechanisms
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon