Effect of Nb Content on the Microstructure and Properties of Laser-Clad NiTi-Based Coatings

Laser cladding has attracted considerable attention for titanium alloy surface modification owing to its high energy density, rapid cooling rate, and excellent metallurgical bonding capability. To investigate the effect of Nb content on the microstructure and properties of NiTi-based coatings, composite coatings containing 10–40 wt% Nb were fabricated on a titanium alloy substrate via laser cladding. The effects of Nb content on phase constitution, microstructure evolution, mechanical properties, tribological performance, residual stress, and surface topography were systematically characterized using XRD, SEM, EDS, microhardness testing, wear testing, digital image correlation, and atomic force microscopy. The results show that increasing Nb content significantly affected the solidification behavior and phase evolution of the coatings. With increasing Nb addition, the dominant phase gradually evolved from NiTi to a coexistence structure of NbTi4 and NiTi, while Ti dilution and elemental segregation became increasingly pronounced. The crystallite size increased from 19.63 nm to 25.91 nm, accompanied by intensified dendritic segregation and surface roughening. Among all samples, the coating containing 10 wt% Nb exhibited the best overall performance, characterized by the finest microstructure, the lowest surface roughness, the lowest residual stress, and the best wear resistance. The superior performance of the low-Nb coating was mainly associated with its finer and more homogeneous microstructure, reduced elemental segregation, lower stress concentration, and enhanced grain-boundary strengthening effect. Excessive Nb addition intensified Ti dilution, grain coarsening, residual stress accumulation, and microstructural heterogeneity, thereby degrading the overall coating performance. More importantly, this study reveals that Nb-regulated Ti dilution behavior governs the synergistic evolution of elemental segregation, surface roughening, residual stress accumulation, and tribological degradation during laser cladding. This work provides new insight into the process–structure–property relationship of NiTi-based composite coatings and offers theoretical guidance for the composition optimization and engineering application of high-performance laser-clad coatings on titanium alloys.