Impact of Suberin Depolymerization Conditions on the Thermal Properties and Flammability of Rigid Polyurethane Foams

Suberinic acids (SA) derived from birch outer bark are renewable feedstocks for bio-based polyols suitable for rigid polyurethane (PU) foams. Three SA fractions were prepared under different depolymerization conditions: acidification at pH 1 (SA1), pH 5 (SA2), and FeCl3-assisted treatment (SA3), and their chemical composition was analysed by GC–MS, Py–GC/MS, and GPC–RID. Polyols derived from tall oil fatty acids (TOFA) or epoxidized TOFA with trimethylolpropane were used as the sole polyol components in foam formulations. The SA fractions differed in molecular weight distribution, affecting polyol processability. All foams exhibited similar limiting oxygen index (19–20) and cone calorimetry results, showing no statistically significant differences in flammability. This indicates that variations in depolymerization conditions, including polyphenolic content and removal of higher-molecular-weight fractions during FeCl3 treatment, do not dominate fire performance under the studied conditions. SA3-based polyols showed the lowest viscosity and produced foams with optimal mechanical and thermal properties, while SA1 offered higher yield with comparable performance. These results demonstrate the feasibility of converting SA fractions into functional polyols for rigid PU foams and highlight the FeCl3-treated SA3 fraction and SA1 as the most promising candidates for further development.