A Single-Link Propagation-Driven Performance Study of IEEE 802.11be Wi-Fi 7 in Complex Indoor Environments

IEEE 802.11be, commercially known as Wi-Fi 7, extends wireless local area network (WLAN) capability through wider channel bandwidths, higher-order modulation, and tri-band operation. However, realised indoor performance is still strongly affected by radio propagation conditions. This study presents a controlled empirical assessment of Wi-Fi 7 behaviour in a multi-storey university building by examining throughput and received signal strength (RSS) across the 2.4 GHz, 5 GHz, and 6 GHz bands using a single-link measurement setup. Six experimental scenarios were used to examine distance variation, wall penetration, line-of-sight (LOS) obstruction, floor separation, antenna orientation, and microwave interference. The measured RSS values were compared with the free-space, two-ray ground reflection, and log-distance shadowing models using mean absolute error (MAE). Six experimental scenarios were designed to isolate dominant indoor impairments, including distance variation, wall penetration, line-of-sight obstruction, floor separation, antenna orientation, and microwave interference. Measured RSS values were evaluated against free-space, two-ray, and log-distance shadowing models using mean absolute error as the comparison metric. Results show that 2.4 GHz retains greater penetration at lesser capacity, while 6 GHz offers the maximum short-range throughput under clear line-of-sight conditionsbut rapidly deteriorates with structural attenuation. Performance in all bands is greatly diminished by multi-wall blockage and line-of-sight loss. A single propagation model cannot adequately capture the divergence introduced by increasing distance and indoor attenuation, while short-range line-of-sight conditions more closely resemble deterministic predictions in terms of measured RSS alignment. Overall, the results highlight the trade-off between Wi-Fi 7’s capacity and coverage, and provide helpful advice for choosing frequencies, positioning access points, and organizing indoor coverage. The research findings provide insights into the practical deployment of next-generation Wi-Fi in multi-story buildings and residential houses.

Authors

Institutions

Publication Details

Journal
Electronics
Published
2026-05-27
DOI
https://doi.org/10.3390/electronics15112324
Primary Topic
Millimeter-Wave Propagation and Modeling
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

A Single-Link Propagation-Driven Performance Study of IEEE 802.11be Wi-Fi 7 in Complex Indoor Environments

Rashid Mustafa, Nurul I. Sarkar
Electronics
Millimeter-Wave Propagation and Modeling
article

A Single-Link Propagation-Driven Performance Study of IEEE 802.11be Wi-Fi 7 in Complex Indoor Environments

Rashid Mustafa, Nurul I. Sarkar
article en

Abstract

IEEE 802.11be, commercially known as Wi-Fi 7, extends wireless local area network (WLAN) capability through wider channel bandwidths, higher-order modulation, and tri-band operation. However, realised indoor performance is still strongly affected by radio propagation conditions. This study presents a controlled empirical assessment of Wi-Fi 7 behaviour in a multi-storey university building by examining throughput and received signal strength (RSS) across the 2.4 GHz, 5 GHz, and 6 GHz bands using a single-link measurement setup. Six experimental scenarios were used to examine distance variation, wall penetration, line-of-sight (LOS) obstruction, floor separation, antenna orientation, and microwave interference. The measured RSS values were compared with the free-space, two-ray ground reflection, and log-distance shadowing models using mean absolute error (MAE). Six experimental scenarios were designed to isolate dominant indoor impairments, including distance variation, wall penetration, line-of-sight obstruction, floor separation, antenna orientation, and microwave interference. Measured RSS values were evaluated against free-space, two-ray, and log-distance shadowing models using mean absolute error as the comparison metric. Results show that 2.4 GHz retains greater penetration at lesser capacity, while 6 GHz offers the maximum short-range throughput under clear line-of-sight conditionsbut rapidly deteriorates with structural attenuation. Performance in all bands is greatly diminished by multi-wall blockage and line-of-sight loss. A single propagation model cannot adequately capture the divergence introduced by increasing distance and indoor attenuation, while short-range line-of-sight conditions more closely resemble deterministic predictions in terms of measured RSS alignment. Overall, the results highlight the trade-off between Wi-Fi 7’s capacity and coverage, and provide helpful advice for choosing frequencies, positioning access points, and organizing indoor coverage. The research findings provide insights into the practical deployment of next-generation Wi-Fi in multi-story buildings and residential houses.

ElectronicsVol. 15(11)
Auckland University of Technology (NZ)
Sustainable cities and communities
Openalex Percentile: Top 9%
Millimeter-Wave Propagation and Modeling
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.