Review on the Application of Lump Ore in Blast Furnace Smelting: Trend and Potential Analysis of Energy Saving and Emission Reduction—Taking Chinese Iron and Steel Enterprises as an Example

Against the backdrop of global climate warming and energy shortages, China proposed the” dual-carbon strategy” in 2020 to address climate change and promote ecological civilization. As a high-carbon emission industry, the iron and steel sector faces an urgent need to accelerate low-carbon transformation. In 2024, China’s crude steel production accounted for over 50% of the total global crude steel production, with the blast furnace–basic oxygen furnace route remaining the dominant process. As a natural iron-bearing raw material, lump ore features high iron grade and low cost, eliminating the requirements of high-temperature processing steps such as sintering or pelletizing. Therefore, increasing the proportion of lump ore in the blast furnace burden represents an effective approach to achieving energy conservation and emission reduction. However, constrained by technical constraints, the current utilization rate of natural lump ore in Chinese steel enterprises remains generally low. Research indicates that despite their higher iron content, lump ores exhibit deficiencies in metallurgical properties such as thermal shock resistance and softening–melting drip characteristics, limiting their large-scale application. Therefore, it is typically necessary to perform pre-treatment such as preheating before charging into the furnace. In actual blast furnace burden design, it is essential to balance metallurgical performance and economic considerations by appropriately combining lump ore with high-basicity sinter and pellets. This approach leverages high-temperature interactions among the burden materials to optimize the overall softening and melting behavior of the mixed charge, thereby ensuring smooth furnace operation while simultaneously advancing the low-carbon transition of the iron and steel industry.