Analysis of Coating Failure in Hainan’s Coastal Atmospheric Environment and Correlation Between Indoor and Outdoor Testing

This study investigated the degradation behavior of a polyurethane acrylate coating/Q345B steel system under the coastal atmospheric conditions of Wenchang, Hainan, and evaluated the correlation between indoor accelerated tests and outdoor exposure. Outdoor exposure tests, single-factor accelerated tests (UV irradiation and neutral salt spray), and a multi-factor cyclic accelerated test combining UV, salt spray, humidity, and thermal cycling were conducted. Coating degradation was characterized by morphological observation, gloss measurement, adhesion testing, and electrochemical impedance spectroscopy. The results showed that after 8 months of outdoor exposure, localized rust spots, blistering, and under-film corrosion appeared on the coating surface. The gloss loss rate reached 15.72% after 3 months, while adhesion decreased from 5.83 MPa to 2.39 MPa during prolonged exposure. UV irradiation mainly affected gloss degradation, whereas corrosive media penetration played a dominant role in adhesion loss and electrochemical deterioration. Compared with single-factor tests, the multi-factor cyclic accelerated test exhibited the highest correlation with outdoor exposure. The corresponding correlation coefficients for gloss loss, adhesion, and low-frequency impedance modulus were 0.9764, 0.9988, and 0.9929, respectively, while the gray relational coefficients reached 0.8334, 0.8467, and 0.7977. These results demonstrate that the multi-factor cyclic accelerated test more accurately reproduces the degradation behavior and failure characteristics observed in the coastal atmosphere of Hainan. The proposed method provides a practical approach for indoor–outdoor correlation analysis and durability evaluation of protective coatings in marine atmospheric environments.