Investigating laser-material interactions in beam-shaping-assisted additive manufacturing of copper using high-fidelity numerical simulation

Copper’s high thermal conductivity and reflectivity make stable melting challenging in powder bed fusion using a laser beam (PBF-LB), particularly under (near-) infrared irradiation. This study develops a high-fidelity computational fluid dynamics (CFD) model in OpenFOAM to simulate copper PBF-LB, incorporating surface tension, Marangoni convection, evaporation, and buoyancy. To address uncertainties in reported absorptivity values, a sensitivity-based calibration is performed. The model is validated against experimental single-track cross sections for Gaussian and 35-65 ring-shaped beam profiles at local absorptivities of 15% - 17%, and for 20-80 and 10-90 ring-shaped beam profiles at 9.3%. The validated model is used to investigate the effects of beam shaping and effective input power on melt-pool dynamics and global absorptivity (absorbed-to-nominal power ratio). Results show a strong correlation between beam shape with these responses, governed by the melting mode. Gaussian beams exhibit distinct conduction, transition, and keyhole regimes, while no clear keyhole formation is observed for the ring-shaped beams under the investigated conditions. Across all cases, melt-pool dimensions and global absorptivity increase with local absorptivity, but their trends differ significantly among beam shapes due to their distinct energy distributions. Temperature-field distributions remain closely associated with the beam profiles at low effective powers, but become increasingly complex with increasing power as multiple laser-ray reflections develop. Temporal analysis further shows that higher power accelerates keyhole formation in Gaussian cases and increases the time lag between the keyhole and melt-pool-depth stabilization, while the 35-65 ring-shaped beam, with its higher core-power ratio, delays the onset of quasi-steady states compared with other ring-shaped beams. These results provide insights into how beam shaping and effective input power influence melt-pool behavior and energy absorption in copper PBF-LB.

Authors

Institutions

Publication Details

Journal
International Journal of Heat and Mass Transfer
Published
2026-11-17
DOI
https://doi.org/10.1016/j.ijheatmasstransfer.2026.129864
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigating laser-material interactions in beam-shaping-assisted additive manufacturing of copper using high-fidelity numerical simulation

Baoshun Zhou, Dirk Herzog, Jesper Henri Hattel, Alexander Bauch et al.
4 links
International Journal of Heat and Mass Transfer
Additive Manufacturing Materials and Processes
article

Investigating laser-material interactions in beam-shaping-assisted additive manufacturing of copper using high-fidelity numerical simulation

Baoshun Zhou, Dirk Herzog, Jesper Henri Hattel, Alexander Bauch, Mohamad Bayat
article en

Abstract

Copper’s high thermal conductivity and reflectivity make stable melting challenging in powder bed fusion using a laser beam (PBF-LB), particularly under (near-) infrared irradiation. This study develops a high-fidelity computational fluid dynamics (CFD) model in OpenFOAM to simulate copper PBF-LB, incorporating surface tension, Marangoni convection, evaporation, and buoyancy. To address uncertainties in reported absorptivity values, a sensitivity-based calibration is performed. The model is validated against experimental single-track cross sections for Gaussian and 35-65 ring-shaped beam profiles at local absorptivities of 15% - 17%, and for 20-80 and 10-90 ring-shaped beam profiles at 9.3%. The validated model is used to investigate the effects of beam shaping and effective input power on melt-pool dynamics and global absorptivity (absorbed-to-nominal power ratio). Results show a strong correlation between beam shape with these responses, governed by the melting mode. Gaussian beams exhibit distinct conduction, transition, and keyhole regimes, while no clear keyhole formation is observed for the ring-shaped beams under the investigated conditions. Across all cases, melt-pool dimensions and global absorptivity increase with local absorptivity, but their trends differ significantly among beam shapes due to their distinct energy distributions. Temperature-field distributions remain closely associated with the beam profiles at low effective powers, but become increasingly complex with increasing power as multiple laser-ray reflections develop. Temporal analysis further shows that higher power accelerates keyhole formation in Gaussian cases and increases the time lag between the keyhole and melt-pool-depth stabilization, while the 35-65 ring-shaped beam, with its higher core-power ratio, delays the onset of quasi-steady states compared with other ring-shaped beams. These results provide insights into how beam shaping and effective input power influence melt-pool behavior and energy absorption in copper PBF-LB.

International Journal of Heat and Mass TransferVol. 274
Universität Hamburg (DE), Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT (DE), Hamburg University of Technology (DE), Technical University of Denmark (DK)
Villum Fonden, HORIZON EUROPE Framework Programme
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon