Development and Characterization of Epoxy/Titanium Carbonitride (TiCN) Nanocomposites: Structural, Thermomechanical, and Dielectric Properties

Nanocomposites consisting of titanium carbonitride nanoparticles (TiCN) and epoxy resin were fabricated and studied as the filler content was varied. Nanocomposites’ structural investigation was conducted via X-ray Diffraction technique (XRD), while their morphology was examined by employing Scanning Electron Microscopy (SEM). Viscoelastic mechanical properties were assessed by Dynamic Mechanical Thermal Analysis (DMTA). Results revealed the reinforcing ability of TiCN nanoparticles. The dielectric characterization of the nanocomposites was carried out using Broadband Dielectric Spectroscopy (BDS) over a wide frequency and temperature range. Dielectric spectroscopy revealed two relaxation processes related to the polymer matrix: the α-relaxation, associated with the glass-to-rubber transition, and the β-relaxation, associated with the rearrangement of side polar groups. In addition, in the low-frequency–high-temperature region, interfacial polarization (IP) was observed. IP is related to the presence of nanoparticles and to the accumulation of unbound charges at the system’s interface and includes contributions from a dipolar process and charge migration (conductivity). Alternating current conductivity generally increases with filler content, though it is also affected by frequency and temperature. Conductivity could influence Electrode Polarization (EP), which often masks the dipolar process of IP. A simple method for removing the EP effect is formulated and tested.