Study on Flow Mechanisms in Shale Oil Horizontal Wells Using Fiber-Optic DTS Production Logging

In response to the challenges in monitoring the production profile during the development of the Qingcheng shale oil field in the Changqing Oilfield, this study systematically investigates the application mechanism and practical effectiveness of Distributed Temperature Sensing (DTS) technology for dynamic monitoring in horizontal wells. By establishing a coupled model of fracture–matrix dual-porosity media flow and wellbore thermodynamics, which integrates mass, momentum, and energy conservation equations solved via the finite difference method, an interpretation method for the production profile based on the Joule–Thomson effect is proposed. The model was calibrated using shut-in temperature data and validated by comparing simulated temperature profiles with DTS measurements under constant-rate production. Field tests conducted in six horizontal wells in the Qingcheng oil field enabled the quantitative analysis of cluster-level production contributions along the horizontal section, with a water-producing zone localization accuracy of ±3.5 m. The results indicate that shale oil wells exhibit a non-uniform production characteristic of “high at the front and low at the rear” during the early production stage, where the production contribution from fully fractured segments can be up to 2.8 times that of adjacent segments. Inversion of the fiber-optic monitoring data reveals that differences in the conductivity of hydraulic fractures are the primary cause of flow heterogeneity. This research provides a theoretical foundation and technical support for the efficient development of shale oil, contributing to the transition of China’s continental shale oil development from “experience-driven” to “data-driven.”