A High-Efficiency 2 W Ka-Band GaAs Power Amplifier with Phase Compensation for 5G Phased Array Systems

This work presents a high-efficiency and linear Ka-band power amplifier (PA) designed in a 0.13μm depletion-mode GaAs pHEMT process, targeting 5G phased-array systems. To minimize passive losses, the output matching network employs an all-transmission-line architecture. Phase mismatches among output branches are compensated directly within the interstage and output matching networks via tailored distributed and capacitive components. Device-level reliability is proactively addressed by maintaining adequate voltage headroom under worst-case load mismatch, based on voltage standing wave ratio (VSWR) analysis. The amplifier achieves a peak small-signal gain of 15.8 dB at 27 GHz. Under continuous-wave excitation at 27 GHz, it delivers 32.9 dBm output power at the 1-dB compression point with 32.8% power-added efficiency (PAE), reaching a peak saturated output of 33.2 dBm and 35.9% PAE. When driven by a 64-QAM signal with a 250 MHz symbol rate, the PA maintains an average output power of 26.3 dBm and an average PAE of 12.2%, with an rms EVM of 3.4% and an SNR of 25.5 dB.

Authors

Institutions

Publication Details

Journal
Electronics
Published
2026-05-11
DOI
https://doi.org/10.3390/electronics15102053
Primary Topic
Advanced Power Amplifier Design
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

A High-Efficiency 2 W Ka-Band GaAs Power Amplifier with Phase Compensation for 5G Phased Array Systems

Mark Ingels, Piet Wambacq, Dries Peumans, Dongyang Yan et al.
Electronics
Advanced Power Amplifier Design
article

A High-Efficiency 2 W Ka-Band GaAs Power Amplifier with Phase Compensation for 5G Phased Array Systems

Mark Ingels, Piet Wambacq, Dries Peumans, Dongyang Yan, Yang Zhang
article en

Abstract

This work presents a high-efficiency and linear Ka-band power amplifier (PA) designed in a 0.13μm depletion-mode GaAs pHEMT process, targeting 5G phased-array systems. To minimize passive losses, the output matching network employs an all-transmission-line architecture. Phase mismatches among output branches are compensated directly within the interstage and output matching networks via tailored distributed and capacitive components. Device-level reliability is proactively addressed by maintaining adequate voltage headroom under worst-case load mismatch, based on voltage standing wave ratio (VSWR) analysis. The amplifier achieves a peak small-signal gain of 15.8 dB at 27 GHz. Under continuous-wave excitation at 27 GHz, it delivers 32.9 dBm output power at the 1-dB compression point with 32.8% power-added efficiency (PAE), reaching a peak saturated output of 33.2 dBm and 35.9% PAE. When driven by a 64-QAM signal with a 250 MHz symbol rate, the PA maintains an average output power of 26.3 dBm and an average PAE of 12.2%, with an rms EVM of 3.4% and an SNR of 25.5 dB.

ElectronicsVol. 15(10)
Vrije Universiteit Brussel (BE), IMEC (BE)
Affordable and clean energy
Openalex Percentile: Top 9%
Advanced Power Amplifier Design
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

A High-Efficiency 2 W Ka-Band GaAs Power Amplifier with Phase Compensation for 5G Phased Array Systems — Mark Ingels, Piet Wambacq, et al. · Electronics (2026) | TGRS Research Map | TGRS