Design and Experimental Verification of a Gibbon-Inspired Tree-Climbing Robot for Forestry Environments

Tree-climbing robots are primarily utilized for pruning and harvesting in tall trees; however, limited structural degrees of freedom (DoFs) reduce their flexibility in complex environments. To improve the flexibility and environmental adaptability of the robots, this study proposes a novel three-armed claw-type tree-climbing robot inspired by gibbons. A 14 DoFs prototype with a total mass of approximately 2.52 kg was developed, comprising three manipulator arms and independently actuated claws. Kinematic models were separately established for the series-connected arms and the parallel-connected moving platform, with accuracy verified through numerical simulations. Based on these models, a control system was implemented, and a physical prototype was tested in field climbing experiments. Grasping tests on surfaces of varying roughness, including moist tree trunks, artificial wood, and smooth steel plates, demonstrated the adaptability of the claw to diverse materials. The robot successfully climbed trunks inclined at 52–90°, supporting a maximum payload of 1.81 kg; each full gait cycle averaged approximately 4 min. These results indicate that the robot can successfully imitate the movements of gibbons during climbing, thereby verifying the feasibility and practical application value of this bionic design in real-world forestry environments.