Effects of Mixed Air on the Performance and Stiffness of a Viscous Fluid Damper

Viscous fluid dampers are widely used for mechanical vibration reduction to ensure the stability and safety of structures and systems. However, when a small amount of air (less than 10%) is mixed into the fluid, the compressibility of the fluid increases, leading to a decrease in the physical series stiffness of the damper. Consequently, under dynamic excitation, the proportion of elastic force in the total output force rises, resulting in an increase in the equivalent parallel additional stiffness—a concept often conflated with the series stiffness in the literature. This paper aims to demonstrate these two aspects of stiffness change by investigating the dynamic characteristics of air-mixed viscous fluid dampers through nonlinear modeling, finite element simulation, and experimental validation. Starting from a nonlinear series model comprising nonlinear damping and a nonlinear fluid spring (series stiffness), the energy dissipation and physical series stiffness under different air mixtures are simulated using a finite element model. To further explore the influence of air, an equivalent linear parallel model is established based on the equal energy principle, yielding an equivalent parallel additional stiffness. The results reveal that the energy dissipation effectiveness and the dynamic stiffness of viscous fluid dampers decrease as the air mixture increases. Nevertheless, the additional stiffness is increased with the air content. When the amount of air mixing is the same, the energy dissipation characteristics of the viscous fluid damper under different excitation frequencies vary. Both the damper efficiency and the additional stiffness are increased with the increase of the excitation frequency. The proposed equivalent linear model effectively captures the coupled effects of air mixture and excitation conditions on damper performance.