Design and experimental validation of multi-section directional coupler with arbitrary coupling and high directivity for sub-6 GHz UWB applications

This work presents a geometrically simple topology for developing an ultra-wideband directional coupler with improved coupling and directivity. A short-ended coupled-line structure is used to achieve an ultra-wideband, tightly coupled symmetric three-section coupler using the microstrip line technology. The proposed design demonstrates an explicit improvement of approximately 1.2 dB in coupling compared to conventional multi-section directional couplers. Calculated, simulated, and measured responses validate the effectiveness of the proposed configuration in terms of low-ripple coupling bandwidth, low insertion loss, and improved directivity performance compared to respective responses of the conventional structure. Couplers featuring a higher number of sections to implement different bandwidths and couplings can be fabricated using the presented structure due to its transmission line-based approach. A prototype of the three-section directional coupler with coupling of 7.6 dB, 8.1 dB, and 8.3 dB and corresponding bandwidths of 104%, 123% and 133% is designed, fabricated, and measured. The experimental results confirm that the coupler can reliably achieve higher coupling with ultra-wideband response from 0.75 GHz to 3.75 GHz (5:1) with 8.3 ± 1.4 dB (ripple). Additionally, the design yields promising performance with return loss > 16 dB, isolation > 20 dB, a phase difference of 90 ± 4°, and directivity > 30 dB, and the maximum circuit size is 0.067λ02. This work aligns with SDG 9: Industry, Innovation and Infrastructure by advancing high-performance microwave components that support efficient, reliable, and scalable communication infrastructure.