Optimized Protocol for the Isolation of <scp>UHMWPE</scp> Wear Debris by Lyophilization and Chemometric Identification ( <scp>EDS</scp> / <scp>PCA</scp> )

Aseptic osteolysis induced by ultra-high-molecular-weight polyethylene (UHMWPE) wear debris has historically been a major cause of late failure in total hip arthroplasty, highlighting the need for more robust methods to isolate and identify wear particles in complex biological matrices. To validate an optimized protocol for the isolation and identification of UHMWPE wear debris from hip simulator lubricant serum by combining lyophilization, alkaline digestion, and chemometric analysis based on principal component analysis (PCA) applied to energy-dispersive x-ray spectroscopy (EDS) data. Wear tests were performed in a hip simulator in accordance with ABNT NBR ISO 14242-1, using metal-on-UHMWPE and ceramic-on-UHMWPE bearing couples lubricated with 25% fetal bovine serum. Three isolation procedures were compared: direct liquid digestion and two protocols based on lyophilization followed by alkaline digestion with 6 mol/L KOH. Particles retained on polyethersulfone (PES) membranes were characterized by scanning electron microscopy (SEM; ASTM F1877) and EDS. Weight percentages of C, O, Na, K, Ca, Cl, S, and Au were subjected to PCA after autoscaling. Lyophilization increased filtration efficiency from 17% (0.2 g) to 25% (~4 g) and markedly reduced sample storage volume. SEM micrographs revealed typical fibrillar and globular UHMWPE particles ranging from 0.1 to 20 μm. PCA explained 67.4% of the total variance in the first three components and generated a distinct cluster of carbon-rich regions, clearly separated from areas dominated by salts and membrane background. The combination of lyophilization, alkaline digestion, and PCA-assisted EDS analysis improves recovery efficiency, preserves particle morphology, and supports the discrimination of UHMWPE wear debris in complex serum matrices, providing a practical and transferable approach for preclinical wear testing.