Reaction Sequence Coordination in Ternary Solid-Waste Systems for Low-Carbon Cementitious Materials

Using solid waste as supplementary cementitious materials (SCMs) is an effective strategy for promoting low-carbon construction development. However, single or binary systems often exhibit mismatched reaction kinetics, thereby limiting their performance at high cement replacement rates. This study focuses on a novel low-carbon concrete designed based on reaction sequence coordination, containing recycled brick powder (RBP), ground granulated blast-furnace slag (GGBS), and self-combusting coal gangue (SCCG). The effects of RBP, GGBS, and SCCG on the hydration process and microstructure of the novel low-carbon concrete with different replacement levels have been studied by testing compressive strength, workability, and durability and observing microstructural changes. The results showed that an optimized ternary composition with an RBP:GGBS:SCCG ratio of 4:3:1 achieves a cement replacement level of 30% while exhibiting a 28-day compressive strength of 38.26 MPa, representing a 14.2% increase compared with plain cement mortar. Microstructural analyses indicate that this enhanced performance results from a time-dependent reaction sequence, in which GGBS contributes predominantly at early ages by supplying calcium, whereas RBP and SCCG mainly participate through delayed pozzolanic reactions and pore refinement at later ages. Consequently, the optimized ternary mortar exhibits a water absorption of 11.12% and a 27.2% reduction in electrical flux. This study aims to provide practical strategies for enhancing the performance of low-carbon cementitious materials through a reaction sequence coordination design approach, thereby improving the utilization efficiency of solid waste in the production of low-carbon building materials.