Effect of H1150M Heat Treatment on Functional Properties of 15-5 PH Stainless Steel Produced by Additive Manufacturing

Additive manufacturing (AM) using powder bed fusion (PBF) has been the predominant printing method used over the last decade. The capability of this approach to produce complex parts with high precision has attracted the attention of major industries as a potential tool for replacing traditional manufacturing technologies. 15-5 PH stainless steel is one of the alloys being studied as a candidate for PBF processes. Its superior strength and corrosion resistance have made it a highly attractive option in numerous industries, including the automotive, nuclear, and petrochemical industries. To enhance the properties of 15-5 PH stainless-steel AM parts following printing, one can use a thermal treatment such as age hardening. However, very little research exists regarding the functional properties of AM parts made from this alloy after heat treatment. This study aims to evaluate the effect of H1150M age hardening heat treatment following printing on the properties of 15-5 PH steel, particularly regarding its mechanical properties and environmental behavior. The microstructure was studied using both optical and electron microscopy, along with X-ray diffraction (XRD) analysis. The mechanical properties were examined by tensile testing and fracture toughness assessment. Corrosion behavior was analyzed in terms of potentiodynamic polarization and using impedance spectroscopy. The results obtained have shown that over-aging caused by H1150M heat treatment has a detrimental effect on the mechanical and environmental behavior of the tested alloy. This was primarily attributed to the formation of an austenitic phase within the inherent martensitic matrix, the generation of brittle phases (mainly carbonitrides of Cr and Nb) and a reduction in grain size.