Hydrogen Embrittlement Behavior of Laser Melting Deposited Ti-6Al-4V Alloy with Different Build Orientations

This study investigates the hydrogen embrittlement susceptibility of laser melting deposition (LMD)-produced Ti-6Al-4V alloy with different build orientations (0°, 45°, 90°) through electrochemical hydrogen charging, slow strain rate testing, and microstructural characterization. Ti-6Al-4V alloys are widely used in marine and offshore engineering, where cathodic protection and corrosion reactions can generate hydrogen, leading to hydrogen ingress and potential embrittlement. Results show that prolonged hydrogen charging induces hydride formation, α-phase fragmentation, and β-phase dissolution, significantly degrading corrosion resistance and mechanical properties. Hydrogen embrittlement susceptibility exhibits notable anisotropy: elongation reductions for 0°, 45°, and 90° specimens are 40.1%, 40.8%, and 29.4%, respectively. The relatively superior resistance observed in the 90° orientation may be associated with its single-layer structure and more uniform dimple distribution. In contrast, the multilayer interfaces in other orientations are likely to serve as preferential sites for hydrogen accumulation, which may contribute to the increased embrittlement susceptibility. This research reveals the failure mechanism of LMD Ti-6Al-4V in hydrogen environments and supports its application in marine engineering.