Control of zonal flows via profile modification and collisional damping in linear magnetized plasma column

This work presents the control of zonal flow excitation and radial localization using plasma profiles and neutral gas pressure in a cylindrical device. In IMPED, filamentary plasma which is produced by argon gas from the source region is guided by Bs into the main chamber and confined by Bm. The magnetic field ratio Rm=Bm/Bs is a key control parameter that governs the radial profiles of ion density (ni), electron temperature (Te), and plasma pressure (p). A low-frequency (5–10 kHz) drift wave (DW) mode is observed in the ñ and a broadband (400–500 kHz) electron temperature gradient (ETG) mode is observed in the electron current saturation fluctuation signal. Low-frequency (0.2–1 kHz) zonal flows (ZFs) are identified based on kθ=0, kr≠0 and the radial polarity reversal of kr in the ϕ̃f signal in ZF frequency range. The DW mode and ETG mode are localized in the peak pressure gradient and peak Te region, and their peak power amplitudes and locations are followed by the peak ZF power. As Rm is decreased, the peak of the radial gradients of P, ni, Te shifts toward the edge with steepening of the corresponding profiles. This alters the radial localization of DW and ETG turbulence and the associated Reynolds stress radial asymmetry, shifting the peak zonal flow location. These results suggest that ZFs in IMPED are driven by both DW and ETG turbulence. Moreover, increased neutral pressure raises collisionality, enhancing ZF damping and reducing their ability to suppress turbulence.