Heat-Assisted Metal Spinning: Review

Heat-assisted metal spinning comprises incremental forming routes, conventional spinning, shear spinning and flow forming, performed at elevated temperature to increase formability. This review consolidates the main advances of the last fifteen years. It outlines spinning mechanics and the rationale for heating (higher ductility, lower forming forces and microstructure control), then compares global and local heating strategies (furnace, flame, induction, laser and hot-gas convection) in terms of temperature uniformity, industrial practicality, energy efficiency and cost. Key process parameters (spindle speed, feed rate and thickness reduction) are discussed with respect to defect formation, and representative windows for defect mitigation are reported. Progress in modeling is reviewed, including coupled thermo-mechanical finite element simulations, damage/formability prediction and emerging data-driven optimization. The review also summarizes microstructural evolution under heat-assisted conditions, phase transformation, dynamic recrystallisation and grain growth, and its impact on final properties. Across more than 100 studies, evidence shows that robust thermal management can roughly double achievable deformation before failure and enables property tailoring in difficult-to-form alloys (Ni-based alloys, high-strength steels, Al, Mg and Ti). Remaining challenges include reliable in situ temperature measurement/control and improved predictive fidelity of simulations. Future opportunities include digital twins, real-time sensing and adaptive, machine-learning-assisted control.