154-W, Single-Frequency, Two-Stage Innoslab Amplifier at 1319 nm

A 1319 nm, single-frequency, two-stage partially end-pumped slab (Innoslab) amplifier with high output power and excellent beam quality was reported. A 3 W, quasi-continuous wave pulsed, single-frequency all-fiber seed laser was amplified to a maximum average power of 154.0 W with a magnification of ~51.3 and overall optical-to-optical efficiency up to 12.0%. The output pulse width was 132.6 μs at a repetition rate of 500 Hz. The beam quality factors of M2 were 1.4 and 1.3 in the horizontal and vertical directions, respectively. The power stability at the maximum output power was 0.43% (RMS) in 10 min. Higher output power and optical-to-optical efficiency could be achieved through optimizing mode matching between the pump beam and the seed laser beam.