Mechanical Behaviour of Geopolymer Concretes with Foamed Geopolymer and Lightweight Mineral Aggregates for Chimney Flue Elements

Geopolymer concretes are increasingly regarded as advanced construction materials for applications requiring high thermal and chemical resistance. This article is a continuation of previously published research and focuses on the mechanical behaviour of geopolymer concretes containing aggregates made of foamed geopolymers and lightweight mineral aggregates, such as expanded clay and perlite, intended for use in chimney flue components. The aim of the study was to determine the influence of lightweight aggregates on the relationship between thermal insulation and the strength parameters of geopolymer concretes intended for use at elevated temperatures. Foamed geopolymer aggregates were produced by a controlled chemical foaming process, followed by grinding to specific grain sizes, yielding highly porous aggregates with low thermal conductivity, reaching approximately 0.075–0.099 W/(m·K). These aggregates were used as lightweight fillers in geopolymer concretes based on class F fly ash activated with alkaline solutions. The resulting composites were designed to combine low density and high thermal insulation with adequate mechanical strength. The mechanical properties of the developed concretes were assessed on the basis of compressive strength tests on cubic specimens and tensile strength in beam bending tests, carried out in accordance with standards. The results presented confirm that the use of foamed geopolymer aggregates enables a simultaneous increase in thermal insulation and the design of ultra-lightweight structural elements with sufficient load-bearing capacity for chimney systems (including suspended ones). This combination of low thermal conductivity, reduced mass, and appropriate mechanical properties makes geopolymer concretes with lightweight mineral and geopolymer aggregates a promising alternative to traditional ceramic materials.