Enhancement of the Read Range of Textronic UHF RFID Transponders

The purpose of this research is to determine which factors contribute to extending the read range of transponders equipped with different coupling-circuit topologies operating within selected RFID frequency bands. The analysis covered transponders that varied in both the configuration of their coupling circuits and their geometric dimensions. To accomplish this, transponder models were created using the EMCoS Studio electromagnetic simulation environment. Each model was subjected to simulations that yielded the mutual inductance and the voltage induced at the chip terminals. This study examines how the impedance of the embroidered antenna, the impedance of the chip’s coupling circuit, and the magnetic flux density affect the resulting chip voltage. In several of the investigated configurations, the peak chip voltage appeared outside the frequency range normally associated with RFID systems. The frequency at which this maximum occurred was dependent on the mutual inductance value. Understanding how individual parameters influence mutual inductance makes it possible to shift the voltage peak into a target operating band. Numerical simulation results, combined with the transponder’s mathematical model, enabled the calculation of the mutual inductance and the terminal voltage—quantities that directly determine the achievable read range. This study focuses on factors such as the resonant frequencies of the antenna and coupling circuit, their impedances, and the characteristics of the magnetic field. The findings show that tuning these parameters can affect not only the location of the voltage maximum, but also its amplitude. This effect introduces additional complexity in designing and selecting suitable transponder configurations.