Pre-Treatment of Printed Circuit Boards for Precious Metal Recovery by Hydrometallurgy Suitable for Small Organizations

The increasing amount of untreated electronic waste, particularly in the telecommunications sector, is having a negative impact on the environment, not only by increasing the production of greenhouse gases, but also by reducing the availability of resources such as metals. At the same time, these metals are increasingly in demand to meet the manufacturing needs of new technologies. One solution is to recover metals by recycling end-of-life electronic boards. However, current processes are often implemented by large companies but are not suitable for small organizations or those with fewer resources, thus limiting their participation in local electronic waste management. Based on laboratory-scale analyses, this project compares the metal concentration results of three pre-treatments that could be suitable for smaller organizations: magnetic separation, chemical pre-treatment with sodium hydroxide, and centrifugation. The proposed preparation step, after the shredding of telecom electronic boards down to a particle diameter of less than 1 mm, is two-stage centrifugation. This pre-treatment enables metals to be concentrated efficiently and safely prior to hydrometallurgical processing.