Modelling and design of a pilot-scale ATES experiment plant under the constraints of an urban environment

Abstract Within the KONATES project, a pilot system was set up in the Science Park in Leipzig to investigate the feasibility of combining Aquifer Thermal Energy Storage (ATES) with groundwater remediation. Along with the circulation and storage of heat through groundwater, a novel zeolite adsorbent and stripping module were used to remove chlorinated hydrocarbons from the extracted groundwater. However, the operation of the ATES system posed challenges due to urban constraints, primarily related to temperature limits and complex infrastructure. To address these limitations, a 3D numerical model was developed to simulate hydraulic and heat transport processes. The model predicted that the ATES system could operate in 10-day active phases at $$0.6\,\text{m}^3$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>0.6</mml:mn> <mml:mspace/> <mml:msup> <mml:mtext>m</mml:mtext> <mml:mn>3</mml:mn> </mml:msup> </mml:mrow> </mml:math> /h and $$70\,^\circ$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>70</mml:mn> <mml:mmultiscripts> <mml:mspace/> <mml:mrow/> <mml:mo>∘</mml:mo> </mml:mmultiscripts> </mml:mrow> </mml:math> injection temperatures with one day of storage time, resulting in a maximum $$4\,^\circ$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>4</mml:mn> <mml:mmultiscripts> <mml:mspace/> <mml:mrow/> <mml:mo>∘</mml:mo> </mml:mmultiscripts> </mml:mrow> </mml:math> C groundwater temperature increase at the boundary to the neighbouring properties. This work demonstrates the usability of 3D coupled hydrothermal models in designing ATES systems in a complex urban environment.