Rational Design of a High Performance Three‐Dimensional Printed Concave Photoreactor for Sunlight‐Drivable Micropollutant Removal from Water
tetracycline (TC) solution, the removal rate can reach 99.9%, demonstrating the importance of designing flow-through concave photoreactor and photocatalytic membrane. Under natural sunlight conditions, the removal rate of TC reached an impressive 99% and total 5000 mL after 5 cycles with flow velocity 1.68 mL/min. This work not only provides an effective strategy for the removal of micro pollutants driven by sunlight, but also provides important references for the design of water treatment equipment through the synergistic effect of 3D printed concave photoreactors and composite materials.
Authors
- Y ZHAO (ORCID: https://orcid.org/0009-0009-4363-3207)
- Yuhong Cai (ORCID: https://orcid.org/0009-0003-5999-293X)
- Pin Song (ORCID: https://orcid.org/0000-0002-1601-7574)
- Qinqin Jiang (ORCID: https://orcid.org/0000-0003-0874-1797)
- Jiaying Lu (ORCID: https://orcid.org/0000-0003-4449-325X)
- Lang Sun
- Y Jiang
- Xin Wang
- Jun Di
- Yuansong Sun
- Wei Jiang
- Bolin Tan
- Ran Long
- Zhou Chen
Institutions
- Nanjing Tech University (CN)
- Anhui Medical University (CN)
- Nanjing University of Science and Technology (CN)
- Second Affiliated Hospital of Anhui Medical University (CN)
- National Synchrotron Radiation Laboratory (CN)
- Anhui Normal University (CN)
Publication Details
- Journal
- Small
- Published
- 2026-05-01
- DOI
- https://doi.org/10.1002/smll.73619
- Primary Topic
- Membrane Separation Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China