Modelling mountain pine beetle-impacted forest wildland fire fuel distributions from remotely piloted aircraft systems imagery and point clouds

This study compared 3D point cloud data derived from Structure-from-Motion (SfM) in 2021 and lidar in 2022 acquired using remotely piloted aircraft systems (RPAS). The overall objective was to develop and compare optical and active point cloud methods for deriving vegetation structures commonly measured in the field to quantify wildfire fuel distribution. The outcomes of the modelling framework were then applied to examine the impacts of mountain pine beetle (MPB) on canopy fuel load volumes in Jasper National Park prior to a high intensity wildfire in 2024. Tree species were classified using geographic object-based image analysis (GEOBIA) with an overall accuracy of ∼ 90%, with higher performance in relatively open canopies with minimal shadow. Photogrammetric and lidar point clouds resolved accurate individual tree height (R 2 = 0.96; 0.99, respectively) when compared to field measurements. Crown base height derived using a windowed point density approach improved agreement with field data (R 2 = 0.76; 0.91, respectively) and improved relative to previously reported methods. Across sites with varying MPB-induced tree mortality, plots dominated by dead conifers showed a redistribution of canopy fuels towards the ground compared to plots of mostly live conifers. This structural shift suggests increased ladder fuel development, reduced canopy continuity, and a heightened likelihood of surface to crown fire transition. The results demonstrate that RPAS point clouds can effectively characterize tree structure and improve crown base height estimation, supporting more accurate assessment of canopy bulk density. These measurements provide a viable alternative to labour-intensive field surveys and can then be used as calibration and validation data for broad-area forest assessment fuel modelling using airborne and satellite remotely sensed data.