Urea-carbon nanotube composites: Synthesis, characterization, and differential antibacterial activity against S. aureus and E. coli

This study focuses on the synthesis, characterization, and antibacterial assessment of urea-functionalized carbon nanotube (CNT) composites. Amide nanotubes can be formed through the self-assembly of amphiphilic molecules driven by hydrogen-bonding interactions; however, previously reported approaches may be limited by aggregation and difficulties in large-scale production. In the present work, CNTs were functionalized with urea and systematically characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, scanning electron microscopy, atomic force microscopy, and measurement of the zeta potential to evaluate their structural, chemical, thermal, morphological, and surface-charge properties. The results demonstrated the incorporation of urea-derived functionalities onto the CNT surface. Although functionalization decreased the thermal stability of the CNTs, the spectroscopic results indicated the presence of amide-related functional groups in the CNT–urea–CNT composite. Among the characterization techniques, XPS provided direct evidence of urea incorporation through the appearance of the N 1s signal and corresponding changes in the C 1s and O 1s spectra. Collectively, these results demonstrate substantial modification of the CNT surface following treatment with urea, without implying definitive covalent attachment. Measurement of the zeta potential further revealed a substantial alteration in the surface-charge behavior following functionalization. As pH increased, the zeta potential progressively decreased, a phenomenon that can be attributed to the deprotonation of surface functional groups. Pristine CNTs exhibited an isoelectric point (IEP) at approximately pH 7–8, whereas urea functionalization shifted the IEP to around pH 4, indicating a significant modification of the CNT surface chemistry. The urea–CNT and CNT–urea–CNT composites exhibited concentration-dependent antibacterial activity against Staphylococcus aureus and Escherichia coli at 0.01–0.1 mg mL–1. The CNT–urea–CNT composite was more active against S. aureus at 0.05 and 0.1 mg mL–1, while the urea–CNT composite showed greater activity at 0.01 mg mL–1. The CNT–urea–CNT composite consistently exhibited stronger activity against E. coli, with a maximum inhibition zone of 33 ± 3.01 mm at 0.1 mg mL–1. These differences may reflect variations in surface structure, dispersion, and interactions with bacterial membranes.

Authors

Institutions

Publication Details

Journal
Macedonian Journal of Chemistry and Chemical Engineering
Published
2026-11-21
DOI
https://doi.org/10.20450/mjcce.2026.3579
Primary Topic
Carbon Nanotubes in Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Urea-carbon nanotube composites: Synthesis, characterization, and differential antibacterial activity against S. aureus and E. coli

Kareem Jumaah Jibrael Al-Salihi, Qadoori Zedan Khalaf
1 links
Macedonian Journal of Chemistry and Chemical Engineering
Carbon Nanotubes in Composites
article

Urea-carbon nanotube composites: Synthesis, characterization, and differential antibacterial activity against S. aureus and E. coli

Kareem Jumaah Jibrael Al-Salihi, Qadoori Zedan Khalaf
article en

Abstract

This study focuses on the synthesis, characterization, and antibacterial assessment of urea-functionalized carbon nanotube (CNT) composites. Amide nanotubes can be formed through the self-assembly of amphiphilic molecules driven by hydrogen-bonding interactions; however, previously reported approaches may be limited by aggregation and difficulties in large-scale production. In the present work, CNTs were functionalized with urea and systematically characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, scanning electron microscopy, atomic force microscopy, and measurement of the zeta potential to evaluate their structural, chemical, thermal, morphological, and surface-charge properties. The results demonstrated the incorporation of urea-derived functionalities onto the CNT surface. Although functionalization decreased the thermal stability of the CNTs, the spectroscopic results indicated the presence of amide-related functional groups in the CNT–urea–CNT composite. Among the characterization techniques, XPS provided direct evidence of urea incorporation through the appearance of the N 1s signal and corresponding changes in the C 1s and O 1s spectra. Collectively, these results demonstrate substantial modification of the CNT surface following treatment with urea, without implying definitive covalent attachment. Measurement of the zeta potential further revealed a substantial alteration in the surface-charge behavior following functionalization. As pH increased, the zeta potential progressively decreased, a phenomenon that can be attributed to the deprotonation of surface functional groups. Pristine CNTs exhibited an isoelectric point (IEP) at approximately pH 7–8, whereas urea functionalization shifted the IEP to around pH 4, indicating a significant modification of the CNT surface chemistry. The urea–CNT and CNT–urea–CNT composites exhibited concentration-dependent antibacterial activity against Staphylococcus aureus and Escherichia coli at 0.01–0.1 mg mL–1. The CNT–urea–CNT composite was more active against S. aureus at 0.05 and 0.1 mg mL–1, while the urea–CNT composite showed greater activity at 0.01 mg mL–1. The CNT–urea–CNT composite consistently exhibited stronger activity against E. coli, with a maximum inhibition zone of 33 ± 3.01 mm at 0.1 mg mL–1. These differences may reflect variations in surface structure, dispersion, and interactions with bacterial membranes.

Macedonian Journal of Chemistry and Chemical EngineeringVol. 45(2)
Iraqi University (IQ), University of Sulaimani (IQ)
Good health and well-being
Carbon Nanotubes in Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon