Synergistic Performance and Microscopic Mechanisms of Mortar Incorporating Recycled Brick Fine Aggregate and Brick Powder

The recycling of waste clay bricks as raw materials for cement-based materials presents an effective solution to ecological pollution and resource shortages. Previous research has separately examined the effects of recycled brick fine aggregate and recycled brick powder on mortar or concrete, but few studies have investigated their combined use. This study aims to clarify the synergistic effect of recycled brick fine aggregate (RBA) and recycled brick powder (RBP) on mortar performance, quantify the influence of the RBP substitution rate on hydration characteristics and microstructural evolution, and determine the optimal mix proportion and curing system for fully recycled brick mortar. Mortar was prepared using 100% RBA and RBP at substitution rates of 0%, 10%, 20%, and 30%. The physical properties, mechanical performance, and durability of the mortar were evaluated, alongside an analysis of its microstructural morphology, mineral composition, and pore structure. The results indicate that adding an appropriate amount of RBP helped maintain the flowability of the mortar. As the RBP substitution rate increased, the mortar strength generally decreased in the early stages, but long-term curing (≥90 days) effectively mitigated this decline. The inclusion of RBP improved chloride ion permeability, with the 20% substitution rate achieving a favorable balance between compressive strength, fluidity, and durability without significantly affecting carbonation resistance. Microstructural analysis revealed that RBP regulated the morphology of hydration products and optimized the pore structure of the mortar, while the mineral composition of hydration products was similar to that of natural mortar. These findings provide a theoretical basis and technical support for the high-value utilization of construction and demolition waste in cement-based materials.