A Bio-Inspired Ring-Cutting and Compliant Clamping Mechanism for Selective Harvesting of Flexible-Stem Crops in Complex Terrain

The selective harvesting of leaves from flexible-stem crops remains a major challenge in agricultural mechanization due to stem compliance, heterogeneous petiole strength, and unstable tool–crop interaction. To address these issues, a bio-inspired ring-cutting and compliant clamping harvesting mechanism is proposed for low-damage selective harvesting under complex terrain conditions. Inspired by the adaptive attachment behavior of octopus suckers, a flexible compliant clamping interface combined with a ring-shaped sliding cutting structure was developed to stabilize flexible stems during harvesting. A coupled kinematic–force analytical model was established to characterize the interaction between tool motion, stem feeding, and cutting behavior. In addition, a sliding cutting mechanics model was introduced to analyze the relationship between cutting force and sliding angle. Dynamic multibody simulations were performed using ADAMS to verify the motion feasibility and trajectory stability of the proposed harvesting mechanism. Bench-scale experiments were conducted using mulberry branches as a representative flexible-stem crop, and a response surface methodology based on a Box–Behnken experimental design was applied to optimize key operational parameters. The optimal parameter combination included a chain linear speed of 0.18 m·s−1, a feeding speed of 0.30 m·s−1, and an installation angle of 36°. Under these conditions, the missed harvest rate was reduced to 9.2–9.8%, demonstrating improved harvesting stability compared with conventional rigid cutting mechanisms. The results indicate that integrating compliant stabilization with sliding cutting provides an effective engineering strategy for selective harvesting of flexible-stem crops in complex agricultural environments.