Improving Tribological Performance of Water-Lubricated Radial Plunger Pairs with Graphene-Modified Epoxy Coatings

The water-lubricated piston–cylinder pair is a critical tribological component in hydraulic systems, yet its performance under boundary lubrication is often limited by high friction and severe wear. Conventional epoxy coatings provide only modest improvements. In this study, graphene-modified epoxy composite coatings were developed and applied to piston substrates, then characterized via scanning electron microscopy, white light interferometry, and nanoindentation. Tribological performance was evaluated using a reciprocating tribometer under simulated pump conditions of 16 MPa and 1500 r/min. Compared to the pure epoxy coating, the graphene-modified coating reduced the friction coefficient by 33.9% and the wear rate by 77.2%, while the graphene oxide-modified coating reduced them by 16.1% and 64.5%, respectively. These results demonstrate that graphene-modified epoxy composite coatings offer an effective surface engineering solution for enhancing the durability and efficiency of water-lubricated systems, with promising potential for water hydraulic applications.