Material Properties of Historic Stone Masonry Components from the Kvarner Littoral of Croatia: A Case Study with Earth Mortar

The mechanical properties of stone masonry and its behavior under monotonic and cyclic loading depend significantly on the local properties of the masonry and the wall typology. This paper presents preliminary results from in situ inspection of stone masonry typologies at several locations in the Kvarner Littoral of Croatia, which revealed the use of earth mortar in a building over 200 years old instead of the commonly used lime mortar. This finding prompted the selection of this building as a case study, for which a detailed visual survey was conducted and laboratory testing employed to characterize the masonry components. The visual inspection showed that the walls of the case study building are constructed from non-degraded stones, with wedges between the blocks and larger corner blocks. The earth mortar is degraded on the wall surface, so non-destructive testing was unsuccessful. Laboratory tests on stone specimens confirmed high compressive strength (over 135 MPa), while laboratory tests on earth mortar specimens indicated compressive strength between 2.22 and 2.65 MPa. The stone compressive strength is comparable to that of high-quality Croatian limestones, while the compressive strength of the earth mortar is comparable to that of historic lime mortars. Microscopic analysis and FTIR spectroscopy of the earth mortar revealed that it does not contain sand or gravel, what distinguishes it from commonly used historic earth mortars, where clay minerals serve as a binder for sand and silt particles. This study presents the first comprehensive research on the material properties of an earth mortar in Croatia.