Surface Modification of FeSiB Soft Magnetic Amorphous Powders for High Processability in 3D Direct Writing

Soft magnetic composite materials have a low total loss and high magnetic conductivity and are highly desirable for high-frequency motors, semiconductors, and 5G communication technologies. However, these composites often contain a high-volume fraction of soft magnetic metallic powders and are difficult to process into complex shapes. Herein, iron-based amorphous powders were surface-modified with silane coupling agents (DTMS and KH570) and applied in 3D direct ink writing (DIW). The modified powders exhibit improved compatibility and dispersion in epoxy resin. The optimized 92.3 wt% [email protected] wt% KH570/EP slurry shows favorable rheological properties and a dense interfacial microstructure. The printed composite achieves the best magnetic performance (Ms: 137.02 ± 1.2 emu/g, Hc: 6.63 ± 0.2 Oe) and stable permeability up to 1 GHz. The surface modification enhanced slurry fluidity, preventing nozzle blockage and increasing powder loading. Various shaped magnetic cores were successfully fabricated with excellent magnetic properties and printing quality. Our work paves a new way for realizing the high processibility of soft magnetic composites, which lays a foundation for a technique for the wide applications of these materials in various electronic devices.