Characterization of Creep-Induced Stiffness Reduction in RC Beams Using Experimental Tests and Numerical Modelling

Many existing reinforced concrete (RC) structures have undergone increases in service loads due to changes in use, functional upgrades, and evolving design codes. This highlights the need for reliable requalification methods that account for long-term degradation mechanisms, particularly those related to sustained loading and creep. This study investigates the residual flexural behavior of RC beams after long-term loading and evaluates its effects on stiffness and ultimate strength. Three RC beams were loaded to 43% of their short-term yielding moment and kept under sustained load for 210 days, while three identical specimens were maintained as unloaded references. Afterward, all beams were subjected to repeated four-point loading–unloading cycles to detect changes in stiffness, strength, and cyclic response. The results indicate that long-term loading did not significantly affect the beams’ ultimate load-carrying capacity compared with the reference specimens. However, the long-term-loaded beams exhibited a clear reduction in initial stiffness. This difference was most evident during the first loading cycle and gradually decreased in subsequent cycles. To interpret these findings, a layered fiber model was developed to simulate cyclic behavior while incorporating time-dependent concrete effects. The model successfully reproduced the main experimental trends, reinforcing the reliability of both the testing program and the analytical approach. The study enhances understanding of stiffness degradation in RC elements subjected to increased service loads.