A Multi-Scale Simulation and Process Optimization Study on the Thread Rolling of TC4DT(ELI) Titanium Alloy High-Strength Fasteners for Cutting-Edge Equipment Applications

TC4DT (ELI) is a damage-tolerant titanium alloy characterized by high fracture toughness and slow crack propagation rates, and is, therefore, considered one of the standard materials for model fasteners in modern equipment. However, its high yield strength leads to excessive tool wear and forming defects. This paper presents a complete FE simulation framework to investigate the thread-rolling process of TC4DT(ELI) bolts M16 × 1.5. Using the actual geometries of the workpiece and rollers, an elasto-plastic three-dimensional finite element model was built in ABAQUS/Explicit to perform verification simulations, with the theoretical blank diameter and forming force as the reference benchmarks. The simulation results agreed well with the actual industrial data. This study carried out single-factor analyses of the effect of three important process parameters—the roll speed, friction coefficient, and initial temperature—on the resulting stress–strain distribution, forming force, and thread formation depth. A modal analysis was performed in ANSYS Workbench to check the structural integrity and avoid resonance while operating. According to the results, the optimized parameters decreased the maximum forming force by 14.8% and improved thread filling. Compared with experimental data, the simulation error in the blank diameter was controlled within 1.2%. The present work, a reliable numerical underpinning for replacing expensive and time-consuming trial-and-error processes, forms a basis for high-performance titanium alloy fasteners and assists in the wider application of such fasteners in modern equipment and any advanced manufacturing industries.